CMHA SEGMENTAL RETAINING WALL SAMPLE SPECIFICATIONS
Revised 2025 The following sample specification illustrates a method of incorporating a SRW into a construction project. Traditional methods and…
Resources
Adhered Manufactured Stone Veneer
Revised August 29, 2025 Section 047300 Note: This guide specification is for adhered manufactured stone veneer. This Section includes the…
Unified Facilities Guide Specifications (UFGS) PICP for Pedestrian and Vehicular Use
Revised 2014 NOTE: This guide specification covers the requirements for constructing a permeable interlocking concrete pavement for pedestrian and vehicular…
Bitumen-set Pavers
Revised 2025 Note: This guide specification is for applications in the U.S. of concrete pavers adhered with a neoprene mastic…
Interlocking Concrete Pavement on an Aggregate Base
Revised 2025 Note: This guide specification for concrete paver applications in the U.S. for concrete pavers and bedding sand over…
Unified Facilities Guide Specification (UFGS) Concrete Block Pavements
Revised 2025 NOTE: This guide specification covers the requirements for constructing a concrete block pavement. Adhere to UFC 1-300-02 Unified…
Thin Concrete ‘Tile’ Pavers
Revised 2025 Note: This guide specification for the U.S. is for the installation of concrete tile paving units generally 3/4…
Paving Slabs on Aggregate Bed for Roof Plaza Decks
Revised 2025 Note: This guide specification for the U.S is for paving slabs used as ballast and/or paving on pedestrian…
Paving Slabs on an Aggregate Base
Revised 2025 NOTE: This guide specification for the U.S. is for paving slabs on a sand bed over a compacted…
Concrete Paving Slabs on a Mortar Setting Bed
Revised 2025 Note: This guide specification for the U.S. is for concrete paving slabs mortared to a concrete base with…